PENTAGON CUFF

5.00

The distinguished and geometric design of this bangle will look great on your wrist.
The geometry of the pentagon confers on this original creation something antique and very contemporary at the same time.
The Pentagon cuff also evokes the pentacle.

Size: S, up the scale to 1,08 to M size, up to 1,16 to L size.
Interior: 60 x 45 mm (2,4 x 1,9 inches)
High : 60mm (2,4 ‘)

Clear
SKU: N/A Categories: , ,

Description

Making this bracelet is very simple, the prototype did not need printing support, but they can be used for a really perfect result.
By cons, the use of a wide edge is necessary to be sure to have a good grip on the board.
The choice of PLA filament is focused on purple for a more feminine appearance.
The 3d print was made with 0.2mm layers and a 0.4mm nozzle in one and a half hours.

Our parameters on Repetier and Slic3r
Extruder: 200 ° C and bed: 55 ° C
Layer height: 0.2 mm
Vertical shells, perimeter: 3
Horizontal shells, solid layer top: 3 and bottom: 3
Fill density: 20%
No support material
Speed perimeters: 35 mm / s