Very cute to print 3d, the cute monster truck is composed of only two different elements.
The body of the vehicle may need support for a perfect result and we advise you to make the axles flat on the tray of your printer.
The wheels are designed to be printed on the inside of the tray and do not require support.
We chose a purple PLA for the presentation template.
It took five hours to make the assembly with a 0.4 mm nozzle and 0.3 mm layers.
Our parameters on Repetier and Slic3r
Extruder: 200 ° C and bed: 55 ° C
Layer height: 0.3 mm
Vertical shells, perimeter: 3
Horizontal shells, solid layer top: 3 and bottom: 3
Fill density: 20%
Overhang threshold: 15 °
Speed perimeters: 45 mm / s